Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

netbackup stopped its backuping mission when the being backuped file is over 4GB

yqy_hnyypk
Occasional Contributor

netbackup stopped its backuping mission when the being backuped file is over 4GB

tape library:mls5052sl
drives(4 members):Sdlt 110/220GB(the same
firmware,lvd)

backup server:compaq proliant dl580
os:windows 2000(English version. SP2)

backup software:veritas netbackup datacenter4.5

scsi card(two members.installed in backup server):64bit/66mhz(dual channel wu3 lvd).

I do the test as following steps
1.when I link these four drives into one circle and link it to one of the scsi card in backup server,netbackup works perfectly!
2.when I link these four dirves into two circles and link its to two scsi cards in the backup server,netbackup ends its backup job after it write 4gb data to the drive.

I want to know why!!!

I want to point out that the target file is located on a unix server (30GB)