problem with e1200

[Steve Douglas_2]

Hi Phil,

Sorry, Here is the log file extract (below)

Cheers, Steve

1443 11/03/2004 11:45:01 0d00h00m00.00s Unit restart and initialization, Firmw
are Version: 5.01 Build Level: 5.01.04
1444 11/03/2004 11:45:49 0d00h00m42.30s New device is added to location 0/0/0
1445 11/03/2004 11:45:49 0d00h00m42.30s New device is added to location 0/1/0
1446 11/03/2004 11:45:49 0d00h00m42.30s New device is added to location 1/2/0
1447 11/03/2004 11:45:50 0d00h00m43.09s FC Port 0 Link is UP.
1448 11/03/2004 11:47:57 0d00h02m50.86s Target Reset received from S_ID: 0x101
00 on LUN: 0
1449 11/03/2004 11:47:57 0d00h02m50.86s SCSI port 0 unexpected disconnect
1450 11/03/2004 11:47:57 0d00h02m50.86s SCSI port 0 unexpected disconnect
1451 11/03/2004 11:50:28 0d00h05m21.85s Assertion failed: 0, file ../ps_initia
tor.c, line 5

1452 11/03/2004 11:50:28 0d00h05m21.85s Assertion failed (continued): 815

[Phil_103]

Hi Steve,

Not sure about this one, However, Your Firmware level is well out of date, If I remember correctly, There are issues with this version. I would update the e1200 to 5.4 asap.

Use the Tape & Library tools utility to upgrade the Tape Mechs, Library and e1200 to the latest before trying anything else.

If I remeber rightly, you cannot upgrade your level of firmware to the latest by using Tape & library Tools Utility, You have to upgrade it via ftp using the e1200 web interface.

Good luck.

[Steve Douglas_2]

Hi Phil,

Sorry for the delay in getting back to you. Upgrading the e1200 firmware to the latest level 5.6.06 (using FTP) as per your suggestion has fixed the problems & the system now backs up reliably.

Many Thanks!!

Cheers, Steve

[Phil_103]

Good news.

[Manolis Spanoudakis_1]

Good pieces of information!