Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

re-calibration ???

SOLVED
Go to solution
Bucher
Occasional Visitor

re-calibration ???

How can i re-calibration my HP Surestore DAT24 storage device?
may the force be with you
5 REPLIES
harry d brown jr
Honored Contributor

Re: re-calibration ???

re-calibrate? Are you talking about aligning the heads?

live free or die
harry
Live Free or Die
Marino Meloni_1
Honored Contributor
Solution

Re: re-calibration ???

hi
to run recalibration, you need to connect you dat on a nt/w2k server and install LTT (Library and Tape Tools).
with this instrument you can load a script from HP site and then run it on the dat 24. this operation is only needed with r/w errors and if LTT report suggest you the recalibration
bye
marino
Rob Marles
Occasional Advisor

Re: re-calibration ???

Marino

The LTT scripts that are in HPUX are found in the directory /opt/ltt/scripts - how do you run these?

LTT suggested to run the recalibration script - and there's nothing in LTT that says "Run Script" or something to that nature.

Thanks.
Joey Jackson
Frequent Advisor

Re: re-calibration ???

when you go to the tools menu and click on run script you will find it there. Why don't you call a support center, we will walk you through it
Every Day is a Good Day
Eugeny Brychkov
Honored Contributor

Re: re-calibration ???

Unfortunately you can run scripts only from windows version of LTT. So please reconnect drive to windows machine (Adaptec 2940UW for DAT8/DAT24 and Adaptec 29160lp for DAT40) and install windows version of LTT
Eugeny