remote reboot MSL6030

[Jan P]

To manage our MSL 6030 from remote, I can login to the Web-interface or telnet.
However, I'm unable to find the option to reboot the device throught these interfaces. The only option sofar is to be locally at the MSL60 and reboot it via the menu's on the box.
Does any body know a way to reboot the MSL 6030 through the web interface or telnet session?

[Efrain Valencia · Accepted solution]

I just logged in into a MLS library and under the FUNCTIONS menu at the very bottom there is a REBOOT BUTTON.

It's funny that it's not mentioned on the manual.

I attached a screenshot of it.

Regards,

Efrain

[Ivan Ferreira]

Have you entered the correct "Level 2" password?

[Mike Cross]

one of 2 things good be going on here.

1. You have put the Library in sequential mode. If you do that then you loose all rmi
functionality as the Library is treated as a Loader.

2. You discovered the Quirk with the RMI. Which is once you re-boot the library you need to exit the browser and restart after a couple of minutes.

I've tested #2 and it works for me here.