HPE Community
StoreEver Tape Storage
1752781 Members
6669 Online
108789 Solutions
New Discussion

replace MSL5026

 
SOLVED
Go to solution
higo
Frequent Advisor

‎07-04-2008 01:50 AM

‎07-04-2008 01:50 AM

replace MSL5026

HI,

Our MSL5026 has a problem and we have to replace it with the same one.
please note that the dlts cartridges and hp StorageWorks network storage router e1200-160 of the failed msl will be place on the new one.
My question is :
this replacement needs any changes of actual configuration on the host (hpux 11.11) or no change to make and it will work.

Thanks for any help.
0 Kudos
Reply
1 REPLY 1
Víctor Cespón
Honored Contributor

‎07-04-2008 01:58 AM

‎07-04-2008 01:58 AM

Solution

Re: replace MSL5026

If you cable the new MSL the same way, and assign the same SCSI ID to the robotic arm and the drives, the configuration on the NSR should still be valid, so the mapping will work and the servers will see the same devices.
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.