Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

restore failed with the following dmesgs

netbackup
Occasional Visitor

restore failed with the following dmesgs

I have a restore running which failed and following messages were there in the dmesg of my backup server.

Feb 10 05:21:09 cenbs scsi: [ID 107833 kern.notice] Requested Block: 1506602 Error Block: 1506602
Feb 10 05:21:09 cenbs scsi: [ID 107833 kern.notice] Vendor: HP Serial Number:
Feb 10 05:21:09 cenbs scsi: [ID 107833 kern.notice] Sense Key: Media Error
Feb 10 05:21:09 cenbs scsi: [ID 107833 kern.notice] ASC: 0x14 (recorded entity not found), ASCQ: 0x0, FRU: 0x0
Feb 10 05:24:09 cenbs scsi: [ID 107833 kern.warning] WARNING: /pci@1d,700000/pci@2/scsi@5/st@1,0 (st36):
Feb 10 05:24:09 cenbs Error for Command: read Error Level: Fatal
Feb 10 05:24:09 cenbs scsi: [ID 107833 kern.notice] Requested Block: 1506602 Error Block: 1506602
Feb 10 05:24:09 cenbs scsi: [ID 107833 kern.notice] Vendor: HP Serial Number:
Feb 10 05:24:09 cenbs scsi: [ID 107833 kern.notice] Sense Key: Media Error
Feb 10 05:24:09 cenbs scsi: [ID 107833 kern.notice] ASC: 0x14 (recorded entity not found), ASCQ: 0x0, FRU: 0x0
Feb 10 05:27:09 cenbs scsi: [ID 107833 kern.warning] WARNING: /pci@1d,700000/pci@2/scsi@5/st@1,0 (st36):
Feb 10 05:27:09 cenbs Error for Command: read Error Level: Fatal
Feb 10 05:27:09 cenbs scsi: [ID 107833 kern.notice] Requested Block: 1506602 Error Block: 1506602
Feb 10 05:27:09 cenbs scsi: [ID 107833 kern.notice] Vendor: HP Serial Number:
Feb 10 05:27:09 cenbs scsi: [ID 107833 kern.notice] Sense Key: Media Error
Feb 10 05:27:09 cenbs scsi: [ID 107833 kern.notice] ASC: 0x14 (recorded entity not found), ASCQ: 0x0, FRU: 0x0
Feb 10 09:43:10 cenbs avrd[20881]: [ID 865562 daemon.error] Cleaning media in drive HPUltrium2-SCSI1
4 REPLIES
LiPEnS
Valued Contributor

Re: restore failed with the following dmesgs

Hi,
tape is damage or you have to clean up drive.

Regards
netbackup
Occasional Visitor

Re: restore failed with the following dmesgs

I have retried after cleaning the drive but the same messages...
LiPEnS
Valued Contributor

Re: restore failed with the following dmesgs

Probably tape is damage but it it was been possible to taste to read them tar command:
# tar -t /dev/rmt/0m
and verify whether something is recorded.

Regards
aleks mindlin
Frequent Advisor

Re: restore failed with the following dmesgs

Try HP LTT drive test (drive acceptance).