ssl 1016 autoloader web admin lockup problems

[gpowers01]

Hello:

We have a HP SSL 1016 autoloader that is giving us some trouble. It seems that when the power is cycled, the web admin page works as expected. However, the web admin starts to "lock up" after some use, and remain that way until the power is cycled again. The symptoms are such that the web interface begins to take 5-10 minutes to load some, never all, of the normal web interface and will eventually never load any of it at all. Again, power cycling the autoloader will rectify this problem, but only for a few minutes.

The firmware is up to date.

Has anyone else had this problem or any suggestions?

Thank you,
gpowers