Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

taperobot upgrade

Ole Martin Aas
Valued Contributor

taperobot upgrade

Hi there

I'm going to upgrade an MSL6030 and the NSR e1200-160 and i'm unsure if the NSR-upgrade can be done from the LTT-utility .
It looks like a possible way of doing it would be to run the robot and drive updates from the LTT and use the ftp interface on the NSR for that upgrade and should it be done in any specific order ?
hope to have some advice on this

regards
Ole Martin Aas
3 REPLIES
Torsten.
Acclaimed Contributor

Re: taperobot upgrade

If the NSR is visible to the outside world (keyword NSR mapping) LTT can do this.

But I did this many times with FTP without problems (different firmware file format!) - make sure to save a copy of the config!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Ole Martin Aas
Valued Contributor

Re: taperobot upgrade

Hi
Thanks for the info - I think i'll use ftp for the NSR as i'm familiar with that

regards
Ole Martin Aas
Ole Martin Aas
Valued Contributor

Re: taperobot upgrade

closing