TruCluster
cancel
Showing results for 
Search instead for 
Did you mean: 

Bad default gateway - Trucluster 5.1A

Alberto_74
Occasional Visitor

Bad default gateway - Trucluster 5.1A

Hi all,

After the installation of "PATCH KIT 6", on my trucluster 5.1A, the "DEFAULT GATEWAY" of one of the two nodes turns out wrong; this node therefore is disconnected from the net, while the other node is working well.

this happens once to the day approximately.

Any ideas?
Thanks
3 REPLIES
Mark Poeschl_2
Honored Contributor

Re: Bad default gateway - Trucluster 5.1A

Just a guess, but check your gated.conf.member file for the cluster member that's going off the network.
Ivan Ferreira
Honored Contributor

Re: Bad default gateway - Trucluster 5.1A

This may be because the node detects a "interface failure" for your network, so it redirects the access thought the other node (using gated). Check the sysman event_viewer for network failures or the system console messages.

Disable network autonegotiation if you have these problems on the network interface and the network switch.
Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?
Han Pilmeyer
Esteemed Contributor

Re: Bad default gateway - Trucluster 5.1A

I suspect Ivan is right. Later patch kits on V5.1B have fixes so that the correct routes are restored once the connection to network interface is restored.