TruCluster
cancel
Showing results for 
Search instead for 
Did you mean: 

Change Network cards to 100baseT from FDDI on TruCluster 1.6

Howard Anderson_2
Frequent Advisor

Change Network cards to 100baseT from FDDI on TruCluster 1.6

I have a 2 node TruCluster 1.6 ASE system running on ES40 hardware.
It currently uses one DAS FDDI card in each node. I wish to remove these and use both of the onboard Ethernet interfaces instead, but on the same IP address (using netRAIN).
(At present one of my nodes is down with a fan fault.)
How do I correctly change over the network within TruCluster such that it ends up with the same IP addresses on each node, that were used for the FDDI cards ?
(At present the asemgr is refusing to let me alter network config, presumably because I cannot relocate to the other member. Do I have to take all of my services offline before it will let me have control of my net config?)