cancel
Showing results for 
Search instead for 
Did you mean: 

Tru cluster installation

Harichand
Occasional Contributor

Tru cluster installation

I am installing a two node trucluster connected via memory channel.
Problem is that during the cluster installation I get error that
"Error editing /etc/sysconfigtab file"
I checked permissions of file but found no problems with that.

Thanks in advance
8 REPLIES
Vladimir Fabecic
Honored Contributor

Re: Tru cluster installation

In what part of installation you got thins error?
What patch kit and patches are installed?
In vino veritas, in VMS cluster
Harichand
Occasional Contributor

Re: Tru cluster installation

I got this error after giving all the options required for the cluster installation and during the installation process.

Vladimir Fabecic
Honored Contributor

Re: Tru cluster installation

/etc/sysconfigtab is cdsl.
Please post output of:
# ls -al /etc/sysconf*
Did you reboot the server after that and tried again?
And what patches are installed?
In vino veritas, in VMS cluster
Harichand
Occasional Contributor

Re: Tru cluster installation

-rwxrwxrwx 1 root system 57 Sep 19 14:30 /etc/sysconfigtab

this is the output for the command u have given..
Vladimir Fabecic
Honored Contributor

Re: Tru cluster installation

This should be something like:
# ls -al /etc/sysconfigtab
-rwxr-xr-x 1 root system 24496 Sep 27 2005 /etc/sysconfigtab
You have 777 permition, but do not thing it is the problem.
Please capture (if possible) clu_create procedure and send output.
In vino veritas, in VMS cluster
Vladimir Fabecic
Honored Contributor

Re: Tru cluster installation

What is the output of:
# cat /etc/sysconfigtab
It the output "normal"?
As I can see from your output, size of your /etc/sysconfigtab is 57. It should be around the size of my output.
The size of your file is like size of symbolic link (but it is not symbolic link). So something happened to the file.
In vino veritas, in VMS cluster
Vladimir Fabecic
Honored Contributor

Re: Tru cluster installation

What is the output of:
# ls -al /cluster/members/member0/etc
In vino veritas, in VMS cluster
Pieter 't Hart
Honored Contributor

Re: Tru cluster installation

"I am installing a two node trucluster"

what version are you installing?
what step goes wrong?

- install os on a single disk (disk-0)
- "setld" the trucluster software
- clu_create using other disks than disk0 on a shared bus with node-2 (disk-1) and a cluster-disk
- boot first cluster node from disk-1
- clu_add_member using another disk.
---the second node is shutdown until now!---
- boot second node

Pieter