Showing results for 
Search instead for 
Do you mean 

time loss

Occasional Contributor

time loss

My system is 2xGS80 Cluster,OS is 5.1B-4 and the system time slow then the standerd time,maybe for more then 1~2 hours within 2 months. Does anybody know how?
5 REPLIES
Valued Contributor

Re: time loss

hi,

most probable causes of the time loss are as follows.

1. patches, check for the patches.
2. change the battery.
3. check you ntp settings, both system may be pear

Shardha
Honored Contributor

Re: time loss

You should be running NTP if you want the system time to remain accurate. See the chapter on "Network Time Protocol" in the "Network Administration: Services" manual:
http://h30097.www3.hp.com/docs/base_doc/DOCUMENTATION/V51B_HTML/ARPPCBTE/TITLE.HTM
Honored Contributor

Re: time loss

I think that this can be considered as "Normal" as we had the same problem.

We opened a case in HP, the response was to run NTP and use an external time source.
Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?
Honored Contributor

Re: time loss

If you want your system to have correct time NTP should be running
>>and use an external time source.
This is very important,becazuse we also faced same problem and external time source was the solution.
BR,
Kapil
I am in this small bowl, I wane see the real world......
Honored Contributor

Re: time loss

If you want your system to have correct time NTP is a good idea
>>and use an external time source.
This is very important,becazuse we also faced same problem and external time source was the solution.
BR,
Kapil
I am in this small bowl, I wane see the real world......
//Add this to "OnDomLoad" event