UCMDB and UD Practitioners Forum (Previously CMS)
Showing results for 
Search instead for 
Do you mean 

HPuCMDB 10.01 integration with HP NNM 9.20 -> ChassisID?

SOLVED
Go to Solution
Occasional Contributor

HPuCMDB 10.01 integration with HP NNM 9.20 -> ChassisID?

Hello,

 

We are using uCMDB 10.01 CUP4 CP12.05 and we have used an integration with NNM 9.20, using PoolDataFromNNM job.

 

Is there a way to populate the cmdb with the serial number of the devices, e.g.

 

MIB Value -> chassisid

 

, that is successfully discovered in NNM?

 

My search found this similar topic, but the answer is unclear to me:

http://h30499.www3.hp.com/t5/Network-Management-OpenView-NNM/NNMi-and-device-serial-numbers/td-p/4367313#.Ud-sNCTVT4Y

 

 

 

4 REPLIES
HPE Expert

Re: HPuCMDB 10.01 integration with HP NNM 9.20 -> ChassisID?

[ Edited ]

The integration could be customized. For more details please check the integration overview at http://support.openview.hp.com/sc/solutions/integrations.jsp?intid=131 and Chapter 18 of Discovery and Integration Content Guide - Integrations (How to Customize Integration in particular).

 

Please let us know if you need help from HP Professional Services to customize the integration.

Regards
-Dmitry Gomel, PMP
If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution.
Click the Like button at the bottom to say 'Thanks'.
Occasional Contributor

Re: HPuCMDB 10.01 integration with HP NNM 9.20 -> ChassisID?

Hi Dima,
Thanks for the quick reply!

Yep, we went through the documentation, before placing the topic here.
Actually, there is also an example given, but it is not so easy to just substitute "managementMode" with "chassisid".
We will give it a try.

If we could not manage to obtain it, what is the procedure for receiving help from HP Pro Services - to open a Service Request?

Thank you for your time and help,

Regards,
Konstantin
HPE Expert

Re: HPuCMDB 10.01 integration with HP NNM 9.20 -> ChassisID?

Please contact me with Private message. I'll move your contact info to HP PSO and they will contact you back. 

Regards
-Dmitry Gomel, PMP
If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution.
Click the Like button at the bottom to say 'Thanks'.
Occasional Contributor

Re: HPuCMDB 10.01 integration with HP NNM 9.20 -> ChassisID?

Thank you!

 

Best regards,

Konstantin

//Add this to "OnDomLoad" event