UCMDB and UD Practitioners Forum (Previously CMS)
Showing results for 
Search instead for 
Do you mean 

How to group the CI's in a network in UCMDB

Advisor

How to group the CI's in a network in UCMDB

[ Edited ]

Hi,

Our office is located at different locations in the locality. Each location is built with the firewall and routers. In this situation, I have configured the scope for one of the location with respective IP ranges.

The firewall range is 10.X.X.X followed by the router. I get some of the CI in the UCMDB which provides this location devices.

My issue is, I need to bring all the devices in this location under the firewall or under the router. What is the procedure to do this.

I get some devices under Firewall, Router, Switches and IP's. How to create a map as stated above....

Firewall -->Router--> IP

Please guide me in setting this..

Saravanan.M

 

 

P.S. this thread has been moved from Application Perf Mgmt (BAC / BSM) Support and News Forum to CMS and Discovery Support and News Forum. - Hp Forum Moderator

//Add this to "OnDomLoad" event