UCMDB and UD Practitioners Forum (Previously CMS)
Showing results for 
Search instead for 
Do you mean 

NTCMD Issues ....

Regular Advisor

NTCMD Issues ....

Hello,

 

I have tried what i mentionned in http://support.openview.hp.com/selfsolve/document/KM00867941 about NTCMD issues on Windows 2008 R2 ....

 

1/  HPCMD.bat issues with  log4j erros (cannot open pipes)

2/ admin$ share results with success

3/ i have add new key "SCMApiConnectionParam" with "0x80000000" param

4/ i try to use compatibility mode with "Windows XP (Service Pack 2)" but this mode is not listed ... only have vista, 7, 2008 SP1 ....

 

Any help would be appreciated

 

thanks

3 REPLIES
Trusted Contributor

Re: NTCMD Issues ....

Hi Esposito,

 

Please let me know which OS that you are using?

Could you please check your OS?, because I can see " Windows XP (Service Pack 2)" option in win 7, win server 2008.

 

Best Regards,

Hoang

-------------------------------------------------------------------------------
*HP Support
If you find this or any post resolves your issue, please be sure to mark it as an accepted solution.*
*If you feel the post is helpful, please assign a KUDO star to say "Thanks"*
Regular Advisor

Re: NTCMD Issues ....

Hello,I'm using Windows 2008 R2 (VMWare).....

 

 

Trusted Contributor

Re: NTCMD Issues ....

Hi Esposito,

 

Could you please try with that option? (ex: Window Server 2008 SP1)

If it doesnt work, please try with another.

 

Best Regards,

Hoang.

-------------------------------------------------------------------------------
*HP Support
If you find this or any post resolves your issue, please be sure to mark it as an accepted solution.*
*If you feel the post is helpful, please assign a KUDO star to say "Thanks"*
//Add this to "OnDomLoad" event