UCMDB and UD Practitioners Forum (Previously CMS)
Showing results for 
Search instead for 
Do you mean 

UCMDB - Not able to discover physical ports

Frequent Advisor

UCMDB - Not able to discover physical ports

[ Edited ]

Hi Experts,

We are using SNMP and WMI protocols to discover our network devices (Routers, Switches,...) and hosts.
We have noticed that no "physical ports" were discovered.
Do we need to use other protocols to discover physical ports?

Thanks in advance.
Regards,
Zouha

 

 

P.S. This thread has been moevd from Application Perf Mgmt (BAC / BSM) Support and News Forum to CMS and Discovery Support and News Forum. - Hp Forum Moderator

2 REPLIES
Trusted Contributor

Re: UCMDB - Not able to discover physical ports

The following jobs should be executed in order for Layer 2 discovery, have you run these?

1) Host Connection by SNMP
2) Host Networking by SNMP
3) VLANS by SNMP
4) VLAN ports by SNMP
5) Layer2 Topology Bridge based by SNMP
6) Layer2 Topology VLAN based by SNMP
Esteemed Contributor

Re: UCMDB - Not able to discover physical ports

Hi ,

you have to run the jobs in the following orders:

- Network Basic
- Network Advanced
- Host Resources Jobs
- Network Connection- Active
- Network Connection- Passive
- Network Layer-2

Hope this helps you

Thanks
Haytham Hosny
Haytham Hosny
//Add this to "OnDomLoad" event