UCMDB and UD Practitioners Forum (Previously CMS)
Showing results for 
Search instead for 
Do you mean 

UCMDB services not starting after installtion

Regular Advisor

UCMDB services not starting after installtion

Hi Team,

 

After installing version 10.20 we are not able to start the services. Please find the error log attached and also the

system security log below:

 

 

The description for Event ID 0 from source PostgreSQL cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

If the event originated on another computer, the display information had to be saved with the event.

The following information was included with the event:

2015-04-02 08:29:05 EDT @ 1744FATAL:  could not create any TCP/IP sockets

 

Regards
Mathew

4 REPLIES
Honored Contributor

Re: UCMDB services not starting after installtion

I will assume you ran the database connection wizard.

Could be a port conflict

Regular Advisor

Re: UCMDB services not starting after installtion

Is there any specific port which we need to use for postgresql?

Honored Contributor

Re: UCMDB services not starting after installtion

It may not be Postgresql?

What else is on the server?

check the UCMDB port usage documentation.

 

Regular Advisor

Re: UCMDB services not starting after installtion

Hi,

 

We were able to get everything to work excep the probe services for DB. It cannot be started and the log files says that connection cannot be established.

 

The ucmdb server makes use of port 3000. We changed it to 5432 and restarted the services but the server wouldnt come up. I am not sure where to check and change the port for UCMDB DB  probe service .

 

Thanks.

//Add this to "OnDomLoad" event