UCMDB and UD Practitioners Forum (Previously CMS)
Showing results for 
Search instead for 
Do you mean 

UD 10.10 not launching

SOLVED
Go to Solution
Trusted Contributor

UD 10.10 not launching

Hi,

 

I am new to UD. I have installed 10.10 server and probe in a single machine . all the services are running fine but the console is not opening. Please advise what should I check?

4 REPLIES
Trusted Contributor

Re: UD 10.10 not launching

Adding Logs. Appreciate your help!

HPE Expert

Re: UD 10.10 not launching

Something very basic is missing.

Was run of Configuration Wizard succesful?

 

 

Regards
-Dmitry Gomel, PMP
If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution.
Click the Like button at the bottom to say 'Thanks'.
Trusted Contributor

Re: UD 10.10 not launching

Hi Dima,

 

 

I changed the db port number and it started to launch now. I am not sure what was the cause now I see its running fine. Thanks for your reply.

 

Could you please tell me how should we begin the discovery and what are the pre-requiesite to discover the servers in the network please.? Appreciate your help!

HPE Expert

Re: UD 10.10 not launching

[ Edited ]

Put some credentials (SSH for xNIX, NTCMD and WMI for Windows boxes), set up IP probe ranges and start discovery jobs.

The easiest way to go is to start from Wizards. It will create needed set of discovery jobs.

UCMDB is complicated product with steep learning curve. Reading some docs could be beneficial.

 

Regards
-Dmitry Gomel, PMP
If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution.
Click the Like button at the bottom to say 'Thanks'.
//Add this to "OnDomLoad" event