UCMDB and UD Practitioners Forum (Previously CMS)
Showing results for 
Search instead for 
Do you mean 

Unable to fetch Windows Disk/CPU/Applications in HPUD.

Valued Contributor

Unable to fetch Windows Disk/CPU/Applications in HPUD.

Hi,

 

I  am having issue in discovering the Windows CPU/Disk/App parameters. The target server connection are successful (Host Connection by WMI & NTCMD).But the node is not reflecting for the next Basic Applications (by WMI & NTCMD) or Inventory.Tried to manually run by adding the node,but the node/IP not reflecting in Host_wmi. There is no error as the connection is successful.

 

Looking forward your suggestion for the next step.

 

Thanks,

Raj

3 REPLIES
Frequent Advisor

Re: Unable to fetch Windows Disk/CPU/Applications in HPUD.

Hi

For your Host Connection by WMI/NTCMD did you get the results with CI types as NTCMD or WMI?

Valued Contributor

Re: Unable to fetch Windows Disk/CPU/Applications in HPUD.

The CI is cretaed by NTCMD only.

 

Thanks,

Raj

HPE Expert

Re: Unable to fetch Windows Disk/CPU/Applications in HPUD.

Assuming that OOTB Trrigger TQL was not changed, it should look like one attached. It will rtrive any hosts connected to IP in Probe Ranges and to any of Shell agent CI.

Find the host -> Right Click -> Get realted CI. Check if conditions are in place.

Regards
-Dmitry Gomel, PMP
If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution.
Click the Like button at the bottom to say 'Thanks'.
//Add this to "OnDomLoad" event