UCMDB and UD Practitioners Forum (Previously CMS)
Showing results for 
Search instead for 
Do you mean 

uCMDB 8.04 - Connect-It 4.11 : Insert data in "bytes" field / blob

SOLVED
Go to Solution
Occasional Contributor

uCMDB 8.04 - Connect-It 4.11 : Insert data in "bytes" field / blob

Hi,

 

I would like to insert data in a bytes field of a CI in uCMDB.

When I send an hexadecimal string and activate "Convert hexadecimal string to a blob" , I haven't the right value in field.

I try to export from uCMDB an hexadecimal string from a blob with this API : PifGetHexStringFromBlob

I don't find the same value

 

Ex : in uCMDB my bytes field contains "TOTO"

When I use PifGetHexStringFromBlob I found this string : "1F8B08000000000000000BF10FF107004549592604000000"

But when I manually convert "TOTO" in hexadecimal string I found : "544F544F"

 

How can I get the same value or import my value in uCMDB ?

Thanks for help

 

Antoine

2 REPLIES
Valued Contributor

Re: uCMDB 8.04 - Connect-It 4.11 : Insert data in "bytes" field / blob

Hi Antoine,

Just want to understand your question first, what is  "Convert hexadecimal string to a blob" ? is this some custom discovery job in UCMDB? Are you trying with ConnectIT api?

 

Thanks

Khurram

Occasional Contributor

Re: uCMDB 8.04 - Connect-It 4.11 : Insert data in "bytes" field / blob

Hi,

Sorry for the delay because I was waiting for the HP support response for myse case.

A defect was submitted to Connect IT RnD and it should be fixed in next patch normally for Connect-It 9.30.


Antoine

//Add this to "OnDomLoad" event