UCMDB and UD Practitioners Forum (Previously CMS)
Showing results for 
Search instead for 
Do you mean 

uCMDB-RTSM integration

Frequent Advisor

uCMDB-RTSM integration



uCMDB - RTSM integration point is not working, showing Pending results since long.


Any help??


Abira Chatterjee

Trusted Contributor

Re: uCMDB-RTSM integration

Hi Citizen,


Please let me know you UCMDB version, CUP and CP version. 

Could you please go to C:\hp\UCMDB\DataFlowProbe\conf\log, open all fcmdb file and change the loglevel=DEBUG,

go to C:\hp\UCMDB\UCMDBServer\conf\log, open reconciliation and change loglevel=DEBUG.

Then re-run the job with clear probe cache and share with me the log folder (in runtime).


Best Regards,


*HP Support
If you find this or any post resolves your issue, please be sure to mark it as an accepted solution.*
*If you feel the post is helpful, please assign a KUDO star to say "Thanks"*
Frequent Advisor

Re: uCMDB-RTSM integration

uCMDB version is 9.5, CUP 3.

Frequent Advisor

Re: uCMDB-RTSM integration



Shut down the probe.


Delete the runtime\logs folder on the probe.


Restart the probe.


Kick off the integration adapter.


Wait 15 minutes and attach the ProbeWrapperGW.log file from the Probe.


Meanwhile - read this: http://h30499.www3.hp.com/t5/CMS-and-Discovery-Support-and/HP-UCMDB-MySQL-Probe-Tuning-Solution/td-p/6470110#

//Add this to "OnDomLoad" event