Virtualization
cancel
Showing results for 
Search instead for 
Did you mean: 

INSTALL HPUX on HPVM 4.3 VM "vm01" using ISO from remote location.

Highlighted
Samckoyur
Occasional Advisor

INSTALL HPUX on HPVM 4.3 VM "vm01" using ISO from remote location.

Hello

 

I am new to HPUX 11.31, I want to create a vm says ‘vm01’ with HPUX 11.31 installed in it.

 

I have a Server on which HPVM 4.3 is install with all the patches and it is running fine.

 

I am not physically in front of that server(I am at some remote location), I an connected via telnet.

 

Now for your reference I have shown some commands which are essential for you to help me ;)

 

I have follow the process, you can find it as attachment.

 

Please let me know where I am wrong, I got stuck out here and I want to proceed further and install HPUX B.11.31 in vm host.

 

Lease let me know if additional info required.

 

Thanks in advance.

 

Yadunandan

4 REPLIES
Stan_M
HPE Pro

Re: INSTALL HPUX on HPVM 4.3 VM "vm01" using ISO from remote location.

The fact that EFI shell seems only block device (blkX), but no filesystem (i.e. no fsX:) suggests that you do not have a bootable DVD. HPUX 11.31 comes on 2 DVDs and the name of the file that you have ...11.31_2.ISO most likely

means that you are using the 2of2 DVD and not the bootable one (1of2).

 

HTH

Stan

I work for HPE
Samckoyur
Occasional Advisor

Re: INSTALL HPUX on HPVM 4.3 VM "vm01" using ISO from remote location.

Thanks for the quick response.

 

I added disk 1 and disk 2
named "B.11.31_1.ISO" and "B.11.31_2.ISO".

 

Now what should I do next?

 

Thanks in advance

 

 

 

Stan_M
HPE Pro

Re: INSTALL HPUX on HPVM 4.3 VM "vm01" using ISO from remote location.

Well, short answer is - follow HPVM Admin manual, chapter 8, Installing HP-uX guest...

;-)

Stan

I work for HPE
Samckoyur
Occasional Advisor

Re: INSTALL HPUX on HPVM 4.3 VM "vm01" using ISO from remote location.

Thank Stan!!