Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
Virtualization
cancel
Showing results for 
Search instead for 
Did you mean: 

Steps to create vpar and npar on Bl 870 i4 wih HP-UX 11.31 version

GSGPrakash
Occasional Advisor

Steps to create vpar and npar on Bl 870 i4 wih HP-UX 11.31 version

could you please provide me the steps to create vpar and npar for HP-UX 11.31 version?

I am using Bl870 i4.

 

Thanks in advance.

 

P.S. This thread has been moved from Server Blades to HP-UX > virtualization. -HP Forum Moderator

2 REPLIES
Torsten.
Acclaimed Contributor

Re: Steps to create vpar and npar on Bl 870 i4 wih HP-UX 11.31 version

You can create 1 or 2 nPars for this server from ILO.

 

For vPars see the guide:

 

http://www.hp.com/go/hpux-vpars-docs

 

Look for version 6.x


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
GSGPrakash
Occasional Advisor

Re: Steps to create vpar and npar on Bl 870 i4 wih HP-UX 11.31 version

do you have any steps to configure?..otherwise I need to read the full document :(

 

its for quick reference. ( sequence of steps)