Taking 3 nPars down to 1 large nPar

[Alice Seeley]

Does anyone have a document they use to do this procedure? I am going to be putting vPars on the system and need to get the original 3 nPars back into one partition and then I can slice it up. If someone has the steps for it, that would be a good help.

[Torsten.]

Locate

"nPartition Administrator's Guide, Second Edition"

from here

http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=en&cc=us&taskId=101&prodClassId=-1&contentType=SupportManual&docIndexId=64255&prodTypeId=15351&prodSeriesId=1844079

[Bhadresh]

Hi,

Have a look at the Table 1-4 nPartition Commands Descriptions from the nPartition Administrator's Guide
http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c01868281/c01868281.pdf

Regards,
Bhadresh

[Torsten. · Accepted solution]

The admin guide has all you need.

Basically you shutdown the 2 nPars you want to delete, use the nPar admin commands (or SMH) to delete the 2 nPars and add the resources to the remaining nPar. Do a reconfig reboot (shutdown -R) to make the new config valid.

[Alice Seeley]

Thanks for all replies. My main was concern was the process which was graciously provided in the above note.