Simpler Navigation coming for Servers and Operating Systems
Coming soon: a much simpler Servers and Operating Systems section of the Community. We will combine many of the older boards, and you won't have to click through so many levels to get at the information you need. If you are looking for an older board and do not find it, check the consolidated boards, as the posts are still there.
Virtualization
cancel
Showing results for 
Search instead for 
Did you mean: 

VPARs in Mixed Mode Environment

saurav sarkar_1
Frequent Visitor

VPARs in Mixed Mode Environment

In a NPAR we are having 5 VPARS. VPAR named as VPAR0, VPAR1,VPAR2,VPAR3 and VPAR4. 

 

We want to run this VPARs in Mixed Mode Environment. Currently our MON version is A.04.04 and all VPAR's version is A.04.04 (HP-UX 11.23)

 

We required only  VPAR2 to be upgrade to HP-UX 11.31.

 

Please suggest what are the necessary steps to be done.

 

Also Suggest that if I upgrade VPAR2 and MON in A.05.xx then is it possible or not. I dont want to do anything on rest of the VPARs.

 

P.S. This thread has been moved from Mobile Apps Development - December 2013 to HP-UX > virtualization. -HP Forum Moderator

 

1 REPLY
Highlighted
Dave Olker
HPE Pro

Re: VPARs in Mixed Mode Environment

I believe the instructions you're looking for are in the "HP-UX Virtual Partitions Administrator Guide - March 2012" located here: http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c03231869/c03231869.pdf

 

Beginning on page 93 is the section titled "Updating from vPars A.04.xx to Mixed HP-UX 11i v2/v3 vPars (A.04.xx and A.05.xx) Environment"

Regards,

 

Dave