1748083 Members
5406 Online
108758 Solutions
New Discussion юеВ

Re: vPars creation

 
SOLVED
Go to solution
xaoc
Occasional Contributor

vPars creation

Hi,

I've a system with installed single vPar (HP-UX 11.31 Release March 2011 and vPars A.05.08), my question is :

Can I create another vPar with a lower Release of the OS (for example HP-UX 11.31 March 2010)?

4 REPLIES 4
Torsten.
Acclaimed Contributor

Re: vPars creation

If you net the minimum requirements for your hardware - yes, you can, but vPars software must be the same.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
xaoc
Occasional Contributor

Re: vPars creation

OK but I'm a little bit confused because according to the ReleaseNotes of A.05.08 March 2011 Release of the OE is a requisite! So is this means that in my case I can put only vPars with OS Release march 2011 (as you said vPar software must be the same version A.05.08)?

Torsten.
Acclaimed Contributor
Solution

Re: vPars creation

You are right, it says "vParsA.05.08 requires the HP-UX11iv3(B.11.31)March2011 update release" - so you need to use it.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Stan_M
HPE Pro

Re: vPars creation

While A.05.08 does need the OE mentioned it also supports mixing of minor version.

See vPars A.05.08 release notes:

"...

HP-UX Virtual Partitions now supports mixing different minor release of vPars. This enhances

the flexibility of using vPars software. This feature is available only on HP-UX 11i v3 vPars

version 05.05 and later

..."

 

So you can have one vpar running A.05.08 and other vpars with A.05.05 or higher installed.

Stan

I work for HPE