BladeSystem Forums have moved here
To make BladeSystem information easier to find, we have moved the BladeSystem forums here, to Servers and Operating Systems.
Volume Management
Showing results for 
Search instead for 
Do you mean 

How to remove 1 ldev of a Volume Set

Advisor

How to remove 1 ldev of a Volume Set

Hi

We are having MPEiX ver.55
We are having 2 Ldev of System Set,10 Ldev 0f Database Set,1 Ldev of TEST Set.
I want to remove this TEST Set.Please give me the details to move further.
I am planning to do Scratch the ldev by SCRATCHVOL 1 in VOLUTIL.
Is it right,Can any guide me please..

-
The word IMPOSSIBLE itself says that I'MPOSSIBLE
3 REPLIES
Honored Contributor

Re: How to remove 1 ldev of a Volume Set

Balaji,

If you are going to remove the
volumeset 'TEST', the following would be my advice.
1. Do a backup of that volume
set.
2. Do a 'VSCLOSE' from MPE to close the volume set.
This puts the device in a 'LONER' state. from this state, you can then use the volutil commands and remove the discs.

HTH,

Chuck Ciesinski
"Show me the $$$$$"
Advisor

Re: How to remove 1 ldev of a Volume Set

Hi

Actually this is status of Volumeset
38-ST15150 MASTER MEMBER1 (TEST_SET-0)

So,I need to take this ldev as SCRATCH State,For that whats to be done.
The word IMPOSSIBLE itself says that I'MPOSSIBLE
Highlighted
Advisor

Re: How to remove 1 ldev of a Volume Set

Thanks Gentlemen,

I got that result.
As i first did vsclose test_set;now
And scratchvol 38.
It came to scratch state.

Thanks
The word IMPOSSIBLE itself says that I'MPOSSIBLE