MSR1003 can't find how enable web?

[alex20]

Hi!

i have new MSR1003 8S

configure with CLI.

but yesterday found this: MSR1000 Web Interface

I logged into the router and can not find the command "ip http"

how enable http?

may by exist anything soft for GUI configuring?

[Paul Kurtz]

Hello,

can you run a display version?  what version of comware are you running?

Latest is MSR100X_7.10.R0306P81

[alex20]

<TM-RT0001>show version
HPE Comware Software, Version 7.1.059, Release 0306P11
Copyright (c) 2010-2016 Hewlett Packard Enterprise Development LP
HPE MSR1003-8 uptime is 0 weeks, 0 days, 2 hours, 15 minutes
Last reboot reason : Power on
Boot image: flash:/msr100x-cmw710-boot-r0306p11.bin
Boot image version: 7.1.059P19, Release 0306P11
  Compiled Apr 11 2016 16:00:00
System image: flash:/msr100x-cmw710-system-r0306p11.bin
System image version: 7.1.059, Release 0306P11
  Compiled Apr 11 2016 16:00:00
Feature image(s) list:
  flash:/msr100x-cmw710-security-r0306p11.bin, version: 7.1.059
    Compiled Apr 11 2016 16:00:00
  flash:/msr100x-cmw710-voice-r0306p11.bin, version: 7.1.059
    Compiled Apr 11 2016 16:00:00
  flash:/msr100x-cmw710-data-r0306p11.bin, version: 7.1.059
    Compiled Apr 11 2016 16:00:00

[Paul Kurtz]

I have a MSR2003 ac and it did not have ip http/s enable either and I believe it had R0304P15 and It was added back in the firmware later.

That command works on mine, with R0306P80 

I would update the firmware to the latest,  link below 

https://h10145.www1.hpe.com/downloads/SoftwareReleases.aspx?ProductNumber=JH060A&lang=&cc=&prodSeriesId=

Documentation is here also,

http://h17007.www1.hpe.com/us/en/networking/library/index.aspx#.WJljwPkrIuU

[alex20]

What is the difference between the versions R03 and R04?

[alex20]

update firmware to R0306P81

but "ip http enable" not found ((

check me please step by step:

1. logon to MSR10003
then type:
2. system-view <cr>
3. ip http enable <cr>

and get error "Unrecognized command found at ... position"

[Paul Kurtz]

Commands look good, I am not sure the difference with R04 releases.

[alex20]

and have some ideas, why not work http managing?