HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Web and Unmanaged
cancel
Showing results for 
Search instead for 
Did you mean: 

1620-24G (JG913A) loop back detection & gateway Problem

 
Moustafasaid
Occasional Visitor

1620-24G (JG913A) loop back detection & gateway Problem

Hi everyone

I am trying to get loop back detection functionality
and set a default gateway
Configuration reseting if AC cut off switch firmware ver1106 & 1108,
& after upgradeing to latest firmware not able to use any CLA with ver 1110.
I have 27 useless units
Any Help...

1 REPLY
16again
Respected Contributor

Re: 1620-24G (JG913A) loop back detection & gateway Problem

from memory....
The gateway issue is known....and should/might be fixed in newer release.  Workaround: assign IP by DHCP ,  the default gateway DHCP option is used. (a dhcp reservation gives switch a semi-fixed IP)