Web and Unmanaged
cancel
Showing results for 
Search instead for 
Did you mean: 

1910 and DHCP with multiple networks

 
mstrmp3
Advisor

1910 and DHCP with multiple networks

We have 1 DHCP server that currently passes out the 192.168.1.x addresses. We now have (via MPLS) 4 new networks (192.168.2.x, 3.x, 4.x, 5.x) and was wondering how to pass DHCP addresses for each of the respective sites. Each site also has a 1910.

 

 

P.S. This thread has been moved from ProCurve / ProVision-Based to web & unmanaged forum.
-HP Forum Moderator

2 REPLIES
Vince_Whirlwind
Trusted Contributor

Re: 1910 and DHCP with multiple networks

You need to enable "DHCP Relay" on the VLAN interface.

mstrmp3
Advisor

Re: 1910 and DHCP with multiple networks

Switch 1 (the one with the DHCP server attached to it) has an IP addr. of 192.168.1.253. The DHCP server is 192.168.1.2. These are on VLAN1

 

Now switch 2 is 192.168.2.253. I have enabled DHCP SERVICE on the DHCP RELAY page, assigned 192.168.1.2 as server group 0 and enabled the 192.168.2.x interface for DHCP relay.

 

My question is what do I have to turn on for Switch 1? (if anything)