HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Web and Unmanaged
cancel
Showing results for 
Search instead for 
Did you mean: 

1920 Switch - Getting the Port Speed configuration via SNMP

 
atomicluis
Occasional Contributor

1920 Switch - Getting the Port Speed configuration via SNMP

I am new to SNMP, but I have been successful in getting the PVID and Duplex setting for each port.

However, I am having a hard time getting the Port Speed setting (auto, 10, 100, 1G, etc)

I found the following OID, but it is not giving me any output.

.1.3.6.1.2.1.10.56.1.3.1.12
fcmPortAdminSpeed OBJECT-TYPE
-- FROM FC-MGMT-MIB

Does anyone know the correct OID or is there anything I need to do to the swicth to get this data?

 

I am using SNMP v2.

 

Thanks

 

1 REPLY
16again
Respected Contributor

Re: 1920 Switch - Getting the Port Speed configuration via SNMP

try OID=.1.3.6.1.2.1.31.1.1.1.15.1 , although it might be negotiated speed