HPE Community
Web and Unmanaged
1753641 Members
5156 Online
108798 Solutions
New Discussion

Application program does not exist Switch HP V1910-48G

 
edgar_uniao
Occasional Visitor

‎02-27-2015 12:46 PM - last edited on ‎02-27-2015 07:56 PM by

‎02-27-2015 12:46 PM - last edited on ‎02-27-2015 07:56 PM by

Application program does not exist Switch HP V1910-48G

Good afternoon,

 

I'm having problems with hp switch v1910-48g. Not possessed the admin password of the switch and follow an internet guide to reset it excluding the .cfg file from flash. Inadvertently ended up excluding firmeware.

I tried to reinstall the bootrom using the procedures listed in the tutorial update more without success.

I am doing the following:

Connect the switch by COM, speed 38400


Option 6. enter bootrom upgrade menu


Option 1. Update full BootRom


Option 3. Set XMODEM protocol parameters


Option 3. 38400

 

After these procedures, through the transfer >> Send, sending the .bin file to flash.

 

At the end I get the following message: something wrong with the file and options to advance the update in flash not continue.

 

Please help me.

 

 

P.S. This thread has been moved from ProCurve / ProVision-Based to Web and Unmanaged. - Hp Forum Moderator

0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.