Configuring HP 1810-8 for Multiple VLAN's with internet access

[cgjolberg]

I want to set up my switch so ports 2-8 are all on their own private VLAN's so they cannot see each other, but they all access the internet through a router I have plugged into port 1. As I have it set up now, the router has dhcp enabled, but I can only get to the internet through a port if that port is untagged in the same VLAN as port 1 is untagged. This will not work because untagging all the ports in the same VLAN would then enable them to all see each other.

Thanks for your help!

P.S. This thread has been moved from Switches, Hubs, Modems (Legacy ITRC forum) to Web and Unmanaged. -HP Forum Moderator