Web and Unmanaged

Configuring QoS on HPE 1920S

 
ITPadawan
Occasional Visitor

Configuring QoS on HPE 1920S

Hi,

Accustomed to configuring QoS on Cisco switches, I find myself a bit lost on this HPE model.
From what I understand, you need to create an ACL and then map an interface or Vlan and apply the corresponding queue.
My question: How can I prioritize one VLAN over another?
Does this switch support CoS or DSCP marking?

What I've done : creating one ACL with "permit" option and IP according to my IP range of testing VLAN (192.168.15.0 0.0.0.255), assign Queue 0. Then, in Vlan tab, linking Vlan 15 with ACL 15.

I cannot join any host on this Vlan after applying...

2 REPLIES 2
akg7
HPE Pro

Re: Configuring QoS on HPE 1920S

Hello,

 

Kindly refer below link for Quality of Service (QOS) from Pg.143 in HPE Office Connect 1920S Switch Series Management and Configuration Guide:

 

https://support.hpe.com/hpesc/public/docDisplay?docId=a00003478en_us

 

Thanks!

I am an HPE Employee

Accept or Kudo

ITPadawan
Occasional Visitor

Re: Configuring QoS on HPE 1920S

I have the guide thank you, I was hoping for a more... descriptive help.

Thanks anyway, we'll change the switches, I'll will be more efficiency