Firmewareupgrade failed - HP ProCurve 1810G - 8 GE, P.1.6

[LNITS]

I'm having exactly the same problems.

Are there any solutions yet?

[jazzcobaz]

I work For HPE support

Please Boot your Switch using p 1.20 ( image 1 ) and then you can upgrade to 2.x on image 2

Please go to this link to download  p1.20

https://h10145.www1.hpe.com/downloads/DownloadSoftware.aspx?SoftwareReleaseUId=9251&ProductNumber=J9449A&lang=&cc=&prodSeriesId=&SaidNumber=

[MarionBates]

Here are the exact steps I followed successfully on five of these:

1. Maintenance -> Dualimage config, select Image1, Activate, Apply
2. Diagnostics -> Reboot switch, UNcheck "save config", reboot
3. Maintenance -> Update Manager, method HTTP, type Code, select Active, choose 1.20, download
4. Diagnostics -> Reboot switch, UNcheck "save config", reboot
5. Maintenance -> Update Manager, method HTTP, type Code, select Backup, choose 2.12, download
6. Maintenance -> Dualimage config, select Image2, Activate, Apply
7. Diagnostics -> Reboot switch, UNcheck "save config", reboot

In case it helps anyone else.