HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Web and Unmanaged
cancel
Showing results for 
Search instead for 
Did you mean: 

HP 1920-24G Route / DHCP

 
Marcilio27
Occasional Collector

HP 1920-24G Route / DHCP

Helow, im trying to configure HP1920-24G, topology below:

GW: 192.168.1.1  (Gateway have a virtual LAN 192.168.10.1)

VLAN1: Switch IP: 192.168.1.252

VLAN10: Swicth IP: 192.168.10.254

How i can configure to VLAN10 navigate to internet, and get a IP from a DHCP Server in 192.168.1.2? Id like to use the switch like a default gateway.

Thks.

 

 

1 REPLY
16again
Respected Contributor

Re: HP 1920-24G Route / DHCP

Use DHCP relay on VLAN10.  On dhcp server, add scope for VLAN10 subnet.
On HP1920, set DG=192.168.1.1.   Also the default gateway must have a route 192.168.10.0/24 -> 192.168.1.252

Hosts on VLAN1 should have a route back to reach hosts on VLAN10. Either use:
-manual static 192.168.10.0/24 route on all VLAN1 hosts  , pointing to 192.168.1.252
OR
-Make 192.168.1.252 the default gateway on VLAN1