HPE Community
Web and Unmanaged
1753274 Members
5165 Online
108792 Solutions
New Discussion

HP 1920 configuration question for old Cisco phones

 
inskeep
Occasional Visitor

‎02-16-2016 08:39 AM

‎02-16-2016 08:39 AM

HP 1920 configuration question for old Cisco phones

I've tried the command poe legacy enable with a 1920 switch, but it still won't power our old Cisco 7900 series phones.  I also tried specifying the amount of power and the power priority, but the phones still wouldn't work. These phones work on a 2900 series HP switch using the command power-over-ethernet pre-std-detect . Is there another configuration option I need to set on the 1920 series switches to accomodate older, pre-802.3af devices like this?

1 person had this problem.
0 Kudos
1 REPLY 1
klemensk
Occasional Visitor

‎03-11-2016 12:31 AM

‎03-11-2016 12:31 AM

Re: HP 1920 configuration question for old Cisco phones

Hi,

did you find any solution? HP Support is saying nothing? Good morning, please wake up ;-)

 

regards,

klemens

0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.