HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Web and Unmanaged
cancel
Showing results for 
Search instead for 
Did you mean: 

HP 1920G Switch Configuration

 
SOLVED
Go to solution
WarNox
Advisor

HP 1920G Switch Configuration

Hi,

I'm trying to configure two HP 1920G switches as per the attached..

  • The 3 VLANs should not be able to communicate with each other.
  • VLAN 2 and VLAN 3 should be connected by link aggregation between the switches.

Can someone please shed some light on how the various ports should be configured (access, hybrid, trunk, tagged, untagged)? This HP logic isn't working with my Cisco brain :)

Happy to share my config but I've tried so many different permutations that it might be better to just start fresh.

Thanks for any help.

1 REPLY
WarNox
Advisor
Solution

Re: HP 1920G Switch Configuration

After some more mucking about I found out I had to turn off STP because these switches don't seem to do PVST :S