Web and Unmanaged
cancel
Showing results for 
Search instead for 
Did you mean: 

HP 1920S and snmp community

 
pnobels
Contributor

HP 1920S and snmp community

Hi,

i'm currently testing a HP 1920S switch and snmp.  Firmware PD.01.07.  I'm using Paessler SNMP tester 5.2.3.

When using the default snmp on the switch (private, public) i can query for example the uptime.  If i however add an extra community with a random name (let's say testro) i can no longer query the switch (i'm getting no response).  The community entry would then be :

community : testro

security : testro

Groupname : defaultread

IP Address : 0.0.0.0.  

Is this expected behaviour?

4 REPLIES 4
pnobels
Contributor

Re: HP 1920S and snmp community

Ah, i noticed i posted this in the wrong community.  Apologies. 

Re: HP 1920S and snmp community

@pnobels:   i posted this in the wrong community.

Looks like the right one now.

johnk3r
Respected Contributor

Re: HP 1920S and snmp community

Try changing the security to "public."

**************************************
ATP FLEXNETWORK V3 | ACSA
Juan87
Occasional Visitor

Re: HP 1920S and snmp community

Hi community:

I have the same problem with all our 1920S switchs. (in our 1920, snmp works perfectly)

I try to delete the public (the only one working) and when i try to recreate it, it does not work anymore.

Software version: PD.02.05

Any possible solution? i checked the manual, but is not very helpful for troubleshooting this problem.

Thanks and have a good day.