Web and Unmanaged
cancel
Showing results for 
Search instead for 
Did you mean: 

HP ProCurve 1810G-24 - some problems with SNMP

 
DSV12
Frequent Advisor

HP ProCurve 1810G-24 - some problems with SNMP

Here is HP ProCurve 1810G-24 with two latest firmware - 1.6 and 1.8. After a quick test found:

1) SNMP is impossible to turn off (for 1800G it was possible).

2) You can't change community name as was for 1800G - it may be only default 'public' string.

3) Very slow SNMP answer if you read large table (~600-700 variables). The first few variables are read quickly but more answers are getting slower and slower until the timeout. 1800 works well with the same sizes of table.

4)Explicit error - in reply to dot1dTpFdbStatus you get incorrect status: 1(other) instead correct 3(learned) for learned MAC's.

 

 

P.S. This thread has been moved from Switches, Hubs, Modems (Legacy ITRC forum) to Web and Unmanaged. -HP Forum Moderator

13 REPLIES
Michael Cale
Occasional Visitor

Re: HP ProCurve 1810G-24 - some problems with SNMP

I can not get the switch to join or be discovered by Procurve Manager because it fails to see the WRITE community name. I can't see any fields on the web interface that let you manage SNMP at all. I need this to join Procurve. I have upgraded the firmware to the latest release. (1.8)
DSV12
Frequent Advisor

Re: HP ProCurve 1810G-24 - some problems with SNMP

1810G has only readonly SNMP features. And latest firmware at now is 1.14 (prev 1.13).
davidfs
Occasional Advisor

Re: HP ProCurve 1810G-24 - some problems with SNMP

Have you found a solution?
Dmitriy Averchev
Occasional Visitor

Re: HP ProCurve 1810G-24 - some problems with SNMP

HP ProCurve 1810G-8 - a similar problem with SNMP:
"Very slow SNMP answer if you read large table (~600-700 variables). The first few variables are read quickly but more answers are getting slower and slower until the timeout".

Firmware v1.6, 1.8 and last 1.14.

I ask the Support service to solve the given problem.
Dmitriy Averchev
Occasional Visitor

Re: HP ProCurve 1810G-24 - some problems with SNMP

HP ProCurve 1810G-8 and firmware v1.16:

The problem with SNMP has remained :(
DSV12
Frequent Advisor

Re: HP ProCurve 1810G-24 - some problems with SNMP

> HP ProCurve 1810G-8 and firmware v1.16:

> The problem with SNMP has remained :(

Yes, I can confirm this. But for me a lot worse that v1.16 has not solved the problem with disappearing management interface.
Matt Jamison
Occasional Visitor

Re: HP ProCurve 1810G-24 - some problems with SNMP

Was having the same problem trying to turn off SNMP. I have 0.0.0.0 as my default gateway. I entered 192.168.2.0 and unticked SNMP and hit Apply. It gave me an error about the Gateway being wrong but when I hit refresh, SNMP is still unchecked. WEIRD!
davidfs
Occasional Advisor

Re: HP ProCurve 1810G-24 - some problems with SNMP

I've received firmware 1.18. I can confirm it corrects problem 4).
DSV12
Frequent Advisor

Re: HP ProCurve 1810G-24 - some problems with SNMP

> I've received firmware 1.18. I can confirm it corrects problem 4).

Good news. You do not know when the v1.18 will be available publicly?
davidfs
Occasional Advisor

Re: HP ProCurve 1810G-24 - some problems with SNMP

I asked the tecnician but didn't understood me.
I can email you, if you want.
DSV12
Frequent Advisor

Re: HP ProCurve 1810G-24 - some problems with SNMP

> I can email you, if you want.
I'll be very grateful for you.
davidfs
Occasional Advisor

Re: HP ProCurve 1810G-24 - some problems with SNMP

ok, I don't see your email, post here (part 1)
(sorry max 1 Mb)
davidfs
Occasional Advisor

Re: HP ProCurve 1810G-24 - some problems with SNMP

part 2