HPE Community
Web and Unmanaged
1752282 Members
4755 Online
108786 Solutions
New Discussion

HP V1910-24G Switch JE006A SNMP

 
pilat322
Occasional Contributor

‎02-13-2013 08:08 AM - last edited on ‎05-28-2013 11:29 PM by

‎02-13-2013 08:08 AM - last edited on ‎05-28-2013 11:29 PM by

HP V1910-24G Switch JE006A SNMP

I have got problem with HP V1910-24G Switch JE006A.

I want to get mac table from device via snmp.
This information is available via web interface (Network->MAC).  But I need  to get the same info via snmpwalk.

I run ' snmpwalk -v 2c -c public $ip atPhysAddress'
but got info only for  DEFAULT_VLAN  interface (number 30) :

RFC1213-MIB::atPhysAddress.30.1.10.0.0.1 = Hex-STRING: 00 5F F4 32 80 92
RFC1213-MIB::atPhysAddress.30.1.10.0.0.3 = Hex-STRING: 40 1E 67 19 3E C6
RFC1213-MIB::atPhysAddress.30.1.10.0.0.4 = Hex-STRING: 00 67 19 26 56 91
RFC1213-MIB::atPhysAddress.30.1.10.0.0.5 = Hex-STRING: 00 61 86 00 16 05
RFC1213-MIB::atPhysAddress.30.1.10.0.0.7 = Hex-STRING: 40 0C 29 91 A5 86

 

How to get mac table for each interfaces (1-24) via snmpwalk? Thanks a lot.

 

Sofware version 5.20 Release 1111

 

 

 

P.S. this thread has been moved from ProCurve / ProVision-Based to Web and Unmanaged - Hp Forum Moderator

1 person had this problem.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.