HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Showing results for 
Search instead for 
Did you mean: 

HP V1910 24P

Occasional Visitor

HP V1910 24P



Is there anybody who can help me with the following question.


I have a HP switch configured on a IP address for outside. So I can at home connect to my switch in the datacenter, but that doesn't work.

How can I fix this so I can login via the interface browser?


Yes I have set the IP address, gateway, etc. I have connected some servers that are working and can communicate with Internet.

In services configuration is HTTP and HTTPS on.



P.S. This thread has been moved from Community Feedback & Suggestions to Web and Unmanaged. - Hp Forum Moderator

Occasional Contributor

Re: HP V1910 24P

did you configure a public IP address or private ip address as outside ip address ? please share the configuration with us 

if you are using private ip address you need configure NAT on firewall or your ISP router

also you have to create a user with enableing web interface acsess .