HPE Community
Web and Unmanaged
1752781 Members
6451 Online
108789 Solutions
New Discussion

HP procurve 1810 V2 problems with Vlan after current cutoff

 
gigiskhan
Occasional Visitor

‎10-30-2014 11:23 PM - last edited on ‎11-02-2014 06:24 AM by

‎10-30-2014 11:23 PM - last edited on ‎11-02-2014 06:24 AM by

HP procurve 1810 V2 problems with Vlan after current cutoff

Hi dears,

I already had problems with those switches (J9803A) with PL1.5.

After switch OFF, the vlan others than vlan 1 were not reachable anymore.

PL1.9 seems to have solved this problem.

 

But, last tnight, once again, we have had current cutoff, and once more, the vlans others than vlan 1 were not reachable anymore.

Even If I rebooted the switch, the problem was still there.

I have had to recover the backup of every switch to get everything going fine again.

 

Does HP plans to build a new release of the firmware in order to definitively solve this problem.

 

Does anyone has find a solution to this problem?

 

regards

 

P.S. This thread has been moved from  ProCurve / ProVision-Based to Web and Unmanaged. -HP Forum Moderator

0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.