Web and Unmanaged
cancel
Showing results for 
Search instead for 
Did you mean: 

HP v1910 -8G RADIUS Authentication and Authorization

DPD-Duke
Occasional Contributor

HP v1910 -8G RADIUS Authentication and Authorization

I am trying to configure an HP v1910-8G switch to authenticate via RADIUS against active directory using NPS.  When configured for RADIUS authentication, I can login into the switch however I do not have administrative permissions.  Does anyone know the RADIUS policy settings to use in NPS to authorize AD users at an adminsitrative level?

 

Thanks

4 REPLIES
bslaght
Occasional Visitor

Re: HP v1910 -8G RADIUS Authentication and Authorization

I have the exact same issue.  I am working with HP Support to try and fix the issue.  Once we have a working config I will post.

 

Did you make any progress with your issue?

Leoman_79
Visitor

Re: HP v1910 -8G RADIUS Authentication and Authorization

Hi, Did you solve the issue?, please let us know
Leoman_79
Visitor

Re: HP v1910 -8G RADIUS Authentication and Authorization

Hi,

 

I have some switches HP1910.

 

Could you share the information for configuring the Radius server as well as the hp switch?

 

Best regards,

 

Leonardo

Emithez
Occasional Advisor

Re: HP v1910 -8G RADIUS Authentication and Authorization

Anyone make any headway on this? I assume it is a vendor specific setting issue on the RADIUS server. Do we use vendor code 11 or 43 (HP or 3COM)? Which attribute and which value? Thanks