HPE 1950 : Problem with VLAN

[olivier_girard1]

Hello

I get Problem configuring VLAN on a 3-switches stack of 1950. The switch with problem is called SW140 in this discussion, and this vlan is working perfectly on the SW149.

here my setup: [SW149] -LACP- [SW140], I have configured a VLAN with the ID 200 and gave it an IP on both sides. (Packet Filter is disabled)

Now i cannot ping each other and i don't see any error in my setup... 

the links:

SW140 LLDP

SW149 LLDP

the aggregations:

SW140:SW140 BAGG1

SW149:

SW149 BAGG9

And their VLAN configs:

SW149:

SW149 Port1/38

SW149 Port2/38

SW140:

SW140 Port1/49

SW140 Port2/49

BAGG9 of SW149:

SW149 Port BAGG9

BAGG1 of SW140:

SW140 Port BAGG1

now the configuration of the VLAN on both switches

SW140 VLAN200SW149 VLAN200

Thanks a lot!

have a nice day

[akg7]

Hello @olivier_girard1,

Is Bagg9 added as Tagged under VLAN 200 in SW149?

Thanks!

[olivier_girard1]

yes, i have allowd all vlans (1-4094)

[akg7]

Hello @olivier_girard1,

How you are testing VLAN 200? Is there any host conencted on VLAN 200 on both switches and on which interfaces?

Thanks!

[olivier_girard1]

I have a port blocked by STP on BAGG9. I will disable STP on all uplink ports next week and will give a feedback here.

best regards

Olivier