Web and Unmanaged
cancel
Showing results for 
Search instead for 
Did you mean: 

HPE OfficeConnect 1920 port status

jogu
Occasional Visitor

HPE OfficeConnect 1920 port status

Hello,

We are using a "HPE OfficeConnect 1920" switch, but we are facing a strange behaviour concerning port status.

Indeed, when we connect a pair cabled on the switch port, we see that everything is OK => the LED is yellow and traffic is OK.

But when we connect to the webinterface (or directly via CLI) and we printed status port, the port was in "disabled" mode.

The side effect is that we can't graph trafic on port's switch because there is no statistics on "disabled" port.

Do you know how to resolve this please (we already reboot several times the switch, without success) ?

Note: Not all the ports are in "disabled" mode.

Thank you.

 

3 REPLIES
parnassus
Honored Contributor

Re: HPE OfficeConnect 1920 port status

Software version?
jogu
Occasional Visitor

Re: HPE OfficeConnect 1920 port status

Hello,

Comware Software, Version 5.20.99, Release 1113
[...]
HPE 1920-48G-PoE+ (370W) Switch
[...]
Hardware Version is REV.A
Bootrom Version is 119
[SubSlot 0] 48GE+4SFP Hardware Version is REV.A

Thank you.

16again
Respected Contributor

Re: HPE OfficeConnect 1920 port status

Do the logs reveal anything about those ports?