HPE OfficeConnect 1920S Configuration Novice

[Cabell]

Hello all,

OK, so I'm a bit of an educated novice.  I'm used to the ComWare version of configuration, but am having difficulty configuring this switch (web interface only, JL381A).  I need to have the primary VLAN (1) with IP of 172.10.0.x, and a Voice VLAN (10) of 172.16.10.x.  I also need DHCP relay for VLAN 10 to point to a VLAN 10 address, and I need the switch to have an IP on each VLAN.  I also need a trunk connection to carry ALL VLANs (not just these 2).  Can anyone assist?  I've tried several configs and failed, and the web interface, being different from the ComWare, and no CLI is driving me a bit bonkers.

Thanks in advance!

[Tanan]

Include/Tagged the voice vlan

Include/Untagged the data vlan

No Need to use trunk (in procurve/aruba trunk means port-channel)

[Prime-Vince]

so they are similar like procurve?