Help Setup two 1810G - 24 switches and two servers.

[CRB]

I need to connect two 1810G-24 switches. I have two servers with dual port NICS (HP NC360T) connected to switch-1 via (2) Cat6 cables on each. I have a Trunk setup on the switch for each server. Seems to be working fine with the default Team setting on the NICs.

I then have the two switches connected via (2) Cat6 cables. I tried to set a new Trunk for the ports between the two switches but it will only show one port connected.

What settings do I need to use?

Thanks,
Chris

P.S. This thread has been moved from Switches, Hubs, Modems (Legacy ITRC forum) to Web and Unmanaged. -HP Forum Moderator

[CRB]

Someone throw me a bone here.........

Can I just set a trunk for the (2) ports connecting the two switches?

[CRB]

I created a trunk one each switch and made them static. Seems to work but have no idea because the documents suck and there seems to be no one that wants to help.