HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Web and Unmanaged
cancel
Showing results for 
Search instead for 
Did you mean: 

How to save running config on HP V1910-24G switch?

 
SOLVED
Go to solution
YuryLihachev
Occasional Contributor

How to save running config on HP V1910-24G switch?

Hello.

I use console for access. Then _cmdline-mode on and make some configuration changes.

How can i save those changes? I use "?" in user and system-view mode, but nothing seems as "write memory" command for me.

Please help.

 

 

P.S. This thread has been moevd from Switches, Hubs, Modems (Legacy ITRC forum) to Web and Unmanaged. - Hp forum Moderator

2 REPLIES
Vince-Whirlwind
Honored Contributor
Solution

Re: How to save running config on HP V1910-24G switch?

"Save config"?

 

It's a shame the H3C commands aren't as sensible as the Procurve ones, which are much better.

YuryLihachev
Occasional Contributor

Re: How to save running config on HP V1910-24G switch?

Thank you!

 

<HP V1910 Switch>save ?
  STRING  The name of specific file(*.cfg)
  backup  Backup config file
  main    Main config file
  safely  Save current configuration safely
  <cr>

<HP V1910 Switch>save
The current configuration will be written to the device. Are you sure? [Y/N]:Y
Please input the file name(*.cfg)[flash:/startup.cfg]
(To leave the existing filename unchanged, press the enter key):flash:/startup.c
fg
 Validating file. Please wait....
 Configuration is saved to device successfully.
<HP V1910 Switch>