Web and Unmanaged
cancel
Showing results for 
Search instead for 
Did you mean: 

How to setting VLAN on 1910-48G Switch (JE009A)

Sleyer
Occasional Contributor

How to setting VLAN on 1910-48G Switch (JE009A)

HELO all,

 

i really need help on this problem..   i need setting vlan becouse my pc will be over more than 200 ++ include server.

my question is :

-how to setting vlan ?

-how to make block A and block B can see in network and share file .

-how to make  block A and Block B  can access  server A,B,C,D

 

 

i attach my network diagram

 

 

 

 

P.S. This thread has been moved from Switches, Hubs, Modems (Legacy ITRC forum) to Web and Unmanaged. - HP Forums Moderator

2 REPLIES
Ck1000
Occasional Advisor

Re: How to setting VLAN on 1910-48G Switch (JE009A)

How do you want to split your network ?

 

Block A is a vlan and block B another ?

 

Is there a vlan for the servers ? the printers ? others ?

 

In your diagram Block A use the same subnet as Servers, is it normal for you ?

 

With this switches you must create static routes to allow a network to connect to another.

Sleyer
Occasional Contributor

Re: How to setting VLAN on 1910-48G Switch (JE009A)


Ck1000 wrote:

How do you want to split your network ?

 - i wan 192.168.0.** and 192.168.1.** can linked each other (can see in network share )

Block A is a vlan and block B another ?

 

Is there a vlan for the servers ? the printers ? others ?

Block A  and B  have network printer 

 

In your diagram Block A use the same subnet as Servers, is it normal for you ?

 ya all printer n server using same subnet

other forum give suggestion  to change subnet to 255.255.254.0 then both ip can see each other .. its that true ?

With this switches you must create static routes to allow a network to connect to another.

have manual guide for this switch ?